RESEARCH | DESIGN + DEVELOPMENT OF DOPE VAPE GEAR | ORANGE COUNTY, CA. USA

BMI V1 User Manual

POWER ON/OFF:

Press the fire button 5 times to turn on/off.

FIRE BUTTON FUNTIONS:

  • Press 3 times to Lock
  • Press 3 times to Unlock
  • Press 5 times quickly to enter the menu

Once in the menu, the first Menu option will be to adjust the power presets. There are 5 presets M1 thru M5 - the purpose of this is to assist in jumping through 5w-100w faster than in 0.1W increments. To set, enter the preset optin in the Menu and lean the unit left, this will jump from preset to preset. Select (press the fire button) the preset you want to adjust. Now lean the unit to the right and it goes into adjust mode. Let the unit adjust to the level you desire for that preset and once there click the fire button to the next menu Exit and lean the unit and you are out of the program. That preset is now set. Repeat above steps for each preset.

NAVIGATING THE MENU:

  1. Power Setting - 5 preset power settings M1 thru M5
  2. Exit - Exit the menu
  3. System - Turn the system off
  4. Link - After the 1st upgrade this is available - this allows upgrades without removing the battery.  Go to link, plug in USB, Lean unit to on for 5 seconds. The LED should flash to green and connect. Only available after 1st upgrade and to be used for future upgrades after the initial from 100W
  5. Display - Adjust the home screen facing left, right or 180 degree auto
Specs Minimum Typical  Maximum
Output Power 10 Watts Varies 100 Watts
Output Voltage 1.0  Volts Varies 9.5 Volts
Output Current 1.25 A 40 A
Atomizer Resistance 0.15 Ohms 3.0 Ohms
510 Connection Floating
510 Diameter 22mm
Battery Size 18650 x2
Battery Vent Holes Yes, 3 Holes
Input Voltage  (Battery required above 25A)   6.2 Volts 7.4 Volts 8.5 Volts
Input Current 1.5 A 10.0 A 40 A
Screen On Current 25 mA
Quiescent Current 1  mA
Power Down Current 350 uA
Efficiency 92%
Screen Size 0.66" OLED
Fire Method Fire Button
Adjust Power Method Gravity Sensor & Up/Down Buttons
USB Charging for Battery No
Update to 150watts

Yes, when the update becomes available

Led Color

Green

Passthrough Feature

No

Protection

Output Short Protection

Reverse Polarity Battery Protection

Low Resistance Protection

Battery Low Voltage Protection

Temperature Protection